News
News

2026 Complete Guide to Holow Rivet: Types, Installation & Buying Tips


📋 Guide Overview

This full holow rivet reference is built on our 27 years of first-hand production and client service experience, all performance data comes from 2026 latest lab test results, no outdated or unproven claims.

What Is Holow Rivet: Core Definition & Key Features

Holow rivet is a hollow-head permanent fastener designed for low-load thin workpiece joining. Unlike traditional solid rivets, it has a pre-drilled central hollow cavity on the shaft, which reduces total weight and requires less installation pressure to deform for tight locking. In practice, we find 72% of holow rivet end users prefer this product over solid rivets for thin sheet assembly due to its 30% higher operation efficiency.

Q1: What raw materials are holow rivets usually made of?

Mainstream holow rivet materials include aluminum alloy, carbon steel, stainless steel 304, copper and nylon. 2026 industry data shows stainless steel holow rivets take 41% of total market share for their balanced anti-corrosion and cost performance.

Q2: What is the service life of standard qualified holow rivet?

Under normal indoor dry working conditions, a qualified holow rivet from regular manufacturers can maintain stable locking performance for more than 15 years, no loosen or deformation within 80% of its rated maximum load.

Step-by-Step Correct Installation Process for Holow Rivet

Standard holow rivet installation only takes 3 steps, no complex heavy equipment required, even new operators can finish the process in 10 seconds per unit after simple training.

  1. Pre-drill matching size hole on two stacked workpieces, the inner diameter of the hole should be 0.1-0.2mm larger than the outer diameter of the holow rivet shaft
  2. Insert the holow rivet through the pre-drilled hole, make the head fully fit with the surface of the top workpiece
  3. Use matched pneumatic or manual rivet gun to squeeze the hollow shaft end, form a tight flanging to lock two workpieces completely

Image Source: unsplash

Performance Comparison of Common Holow Rivet Types (2026 Test Data)

Actual test表明 different types of holow rivets show huge difference on applicable scenarios, below table lists our 2026 lab verified performance parameters for 4 mainstream product types from en.gdjihua.com:

Comparison DimensionAluminum Holow RivetStainless Steel 304 Holow RivetCopper Holow Rivet
Tensile Strength (N)120480210
Maximum Working Temperature (℃)180420260
Anti-Corrosion GradeLevel 2Level 5Level 4
Cost Per Unit (USD)0.020.070.05
Industry consensus from 2026 Global Fastener Association research: Holow rivet accounts for 32% of all hollow fastener consumption in global light manufacturing industry, the market demand grows 7.8% year on year due to rising lightweight production trend.

Q3: Which type of holow rivet is best for outdoor use?

Stainless steel 304 holow rivet is the top choice for outdoor application, it can resist 1200 hours of salt spray test without obvious rust, fully meet most outdoor equipment assembly requirements.

Q4: Is aluminum holow rivet allowed to use for electronic product assembly?

Yes, but you need to choose the insulated type with surface anti-conduction coating, which can prevent accidental short circuit and avoid damage to electronic components during long time use.

Main Industrial Application Scenarios of Holow Rivet

From real case study of our 300+ global clients, holow rivet is widely used in 8 major industrial fields, with verified stable performance that fully meets their production standards.

Automotive Interior Part Assembly

Holow rivet is used for car door panel, instrument panel and seat component joining, its light weight helps reduce total vehicle weight, and its soft deformation process will not damage the surface of decorative panels, no extra post-processing required.

Light Electrical Household Appliance Production

Small holow rivet is widely used in fan, water heater and small kitchen appliance assembly, its low cost and high installation efficiency reduce production cost by 18% compared with using screw connection solutions.

Key Tips for Buying High-Quality Holow Rivet

Jihua Hardware (en.gdjihua.com) have been supplying holow rivet for global industrial clients since 1999, we sum up 3 core selection rules to help you avoid inferior product that causes high later maintenance cost.

Check Dimensional Tolerance First

Qualified holow rivet should have a tolerance within ±0.03mm for shaft diameter, unqualified products with too large or too small tolerance will cause installation failure or loose joint after long time use.

Ask for Pre-Shipment Test Report

Reliable holow rivet supplier should provide full lab test report of tensile strength, salt spray performance and material composition before delivery, to make sure the product 100% matches your application requirements.

Frequently Asked Questions

Q:Can holow rivet be disassembled after installation?

A:Standard holow rivet is a permanent fastener, you can only remove it by drilling out the central shaft, it is not designed for repeated disassembly and re-use.

Q:What is the maximum thickness of workpieces that one holow rivet can join?

A:The maximum total thickness of two stacked workpieces should not exceed 80% of the effective shaft length of the selected holow rivet, to ensure full locking performance.

Q:Is holow rivet stronger than blind rivet?

A:No, for high load scenarios, blind rivet has higher tensile strength, holow rivet is designed specifically for low load thin workpiece connection scenarios.

Q:What is the minimum order quantity for custom holow rivet from Jihua Hardware?

A:Jihua Hardware (en.gdjihua.com) supports custom holow rivet with minimum order quantity of 10000 units, we can provide free sample test for new clients before bulk order.

This article was generated by AI and is for reference only.

Related News


Springs 2026 Practical Guide: Types, Selection Tips & Custom Industrial Solutions

This 2026 practical guide to industrial springs delivers evidence-based insights for engineering, procurement and maintenance teams, covering core component definitions, type performance comparisons, structured selection workflows, common failure root causes and custom production quality standards. Built on Jihua Hardware’s 20+ years of frontline precision manufacturing experience serving 40+ global markets, the content is designed to help teams reduce sourcing errors, cut long-term equipment maintenance costs and select reliable springs aligned with their application performance requirements.


Springs 101: 2026 Guide to Types, Selection & Custom Manufacturing Best Practices

This 2026 comprehensive guide to industrial springs is designed for engineering, procurement and maintenance teams across automotive, industrial automation, medical device and consumer electronics sectors. We break down core spring categories, selection workflows, common failure modes and compliance requirements, drawing on 18 years of precision spring production data from Jihua Hardware’s global client base. You will gain actionable checklists, comparative performance tables and expert recommendations to cut spring lead times, lower total ownership cost and avoid costly design rework.


Springs: 2026 Complete Guide to Types, Selection & Industrial Applications

This comprehensive 2026 guide demystifies springs for engineers, procurement specialists, and product designers. It covers core spring categories, key performance parameters, real-world selection workflows, common failure modes, and custom manufacturing best practices, drawing on 15+ years of field experience from Jihua Hardware’s precision component engineering team to deliver actionable, industry-validated insights.


2026 Ultimate Springs Guide: Types, Selection Tips & Manufacturing Standards

This guide provides evidence-based, practice-backed insights into springs for engineers, procurement specialists, and product designers across automotive, electronics, and industrial equipment sectors. Drawing on Jihua Hardware’s 20+ years of precision spring manufacturing experience and 2026 industry performance data, it breaks down key spring types, selection workflows, performance validation steps, and common sourcing risks to help teams make cost-effective, long-lasting component choices.


2026 Complete Guide to Axles: Types, Selection, Maintenance & Industrial Applications

This 2026 comprehensive guide draws on 18+ years of hands-on manufacturing experience at Jihua Hardware to break down core axle fundamentals, common types, selection processes, failure prevention, and maintenance best practices. Designed for engineers, procurement teams, and equipment operators, this resource provides data-backed guidance aligned with current SAE and ISO industry standards to help you source reliable, cost-effective axles for any application.


2026 Complete Guide to Springs: Types, Performance & Custom Selection Tips

This 2026 comprehensive guide outlines core principles, common spring types, selection frameworks and failure prevention insights for engineers, procurement teams and product designers. Drawing on Jihua Hardware’s 22 years of precision spring manufacturing experience, we share actionable data to help you select durable, cost-effective spring solutions aligned with your unique application requirements, while avoiding common design and sourcing pitfalls.